How to set up a navigator on a mobile phone: step by step instructions. How to enable GPS on Android and configure it Navigator does not connect to the Internet

Today, one of the most accurate devices that enable a person to navigate the terrain are GPS navigators. Today we will tell you how to connect your navigator to your computer on your own. Their main purpose is to receive a signal from the satellite, and due to the presence of special programs built into the navigator, they are simply irreplaceable for determining their location.

Detailed information on how to connect the navigator to the computer quickly

1. To connect your navigator to your computer using a USB cable, you must connect the cable to your navigator.
2. Turn on the navigator.
3. Usually the computer is able to automatically detect the new device. If this does not happen, you should install the software that is sold with the navigator.
4. After the computer has identified the navigator, you can start copying files from one device to another.
5. After copying the files, disconnect the cable.
6. While holding the "Start" button, turn off, and then turn on the navigator.
7. The above steps describe the stages of connecting the navigator to a computer, Treelogic line. With navigators of the GARMIN series, things are more complicated, in which case you will have to work with a soldering iron. Such a navigator is connected to the COM port of a computer using a 9-pin connector. To connect the navigator to the computer, use a three-wire cable: one wire is "ground", the second is used to transmit data, the third is to receive them.
8. We clean all the contacts and wires necessary for soldering.
9. We solder the wire transmitting data to the contact of the second nine-pin COM connector.
10. After that, the wire that receives all the information should be soldered to the contact of the third nine-pin COM connector (or to the two and 25-pin contacts).
11. The third wire ("ground" cable braid) must be soldered to the fifth nine-pin COM connector pin (or the seventh pin on the 25-pin connector).
12. Next, we connect the already unsoldered cable to the COM port of your computer.
13. Turn on the navigator.
14. After completing the data exchange, turn off the navigator, and then disconnect the cable.

Mikhail Orekhov

Those who like to travel, or those whose work is connected with visiting many new places for them, may ask quite a natural question of how to connect a gps navigator to their car. This article will discuss how this device is connected.

Those who are deciding how to install the navigator in the car made the right choice.

Car navigators today are quite complex devices that support. This system is synchronized with the satellite, which allows the driver to quickly receive data on his own location with frequent data updates. If you install a gps navigator in your car, then the driver gets the opportunity to:

• Move along new and unfamiliar routes;
• Move around the city, bypassing traffic jams;
• Reveal the places where cameras and radars are located;
• Set a route to any point, even in unfamiliar terrain, with the subsequent saving of the worked out route in the device's memory.

The installed high-end navigator, despite its high cost, has a number of undeniable advantages that are relevant for some drivers. First of all, it has an effective blocking mechanism that will provide reliable protection against theft of your equipment. In addition, among other advantages, the following can be distinguished:

• Various additional functions, including entertainment;
• Operator voice notifications about turns and other key points;
• Choosing the most profitable route, as well as calculating the exact cost of the planned journey.

Types of gps navigators

Motorists planning to install a navigator in their car should first decide on the type of device, of which there are three main options:

1. Built-in;
2. Portable;
3. Pocket.

The installation of the built-in navigator in the car is carried out in specialized service centers. Often, the output of the navigator information is carried out directly on a standard monitor in the car, while the control is carried out using sensors. Such navigation equipment is discreetly installed in the panels, and therefore does not take up space directly in the cabin, does not block the driver's view and does not change the interior design of the car as a whole. The installed built-in navigator is powered by the car battery, and the remote antenna will provide strong and reliable.

Portable models of navigators are installed on a standard mount, which is attached to the windshield with a suction cup. Such a device will already require the use of its own charger. If necessary and at the request of the user, as well as depending on the model of the device, you can create your own navigation complex. Everyone will be able to cope with the installation and configuration of portable navigator options; it can also be placed at the discretion of the driver himself. However, there are a number of general guidelines that should be followed when installing a portable model:

• The navigator should not restrict the normal view from the driver's seat;
• The device has a built-in antenna, and therefore should not be shielded by anything;
• The location of the navigator is obliged to provide a full view of the display by the driver while driving.

In addition to the fact that such a navigator can be easily installed on other cars, or, if necessary, used when hiking, it can also serve as a video recorder. Most modern models are equipped with this function, however, the installation of the navigator in this case should provide the correct camera angle.

Pocket navigation systems are rarely used by drivers because they are less comfortable. Often, the information from such a navigator is voiced by the passenger; in extreme cases, the driver can install it in a holder for a mobile phone or in a cup holder.

Alternative options

Many drivers, in order to save money or because of habit, try to find alternative solutions in matters of navigation. For this purpose, all kinds of devices can be used: mobile phones, tablets, laptops, etc. It should be noted that such solutions are not always as convenient as they might seem. First of all, they will require the installation of all the necessary software and setting up communication with satellites, which must be maintained constantly, as well as the charge of the device itself. In addition, the dimensions of such devices, the way they are fastened and placed in the cabin, as well as the implementation of all kinds of manipulations on them, often bring additional discomfort.
There are no guarantees that an improvised means used as a gps navigator will not make any failure, disconnection, etc. his pocket variations.

Find out how to load maps into the device.

Conclusion

So, based on this information, it is obvious that a navigation device installed in a car allows the driver to receive a lot of advantages. Among the main ones: saving fuel and time, the ability to discover new places, getting various useful information in real time.

If you have never used an auto-navigator, then you may think that, like any other device, it requires some special skills, just like this is not the case. It is very easy to install and configure the auto-navigator, and instructions are always supplied with the device, if not in paper, then in electronic form.

How to install car GPS navigator (auto navigator)

The box with the navigator always contains a bracket and a stand. The stand is a frame where the body of the navigator is inserted to fix it on the bracket. The bracket is required to firmly attach the navigator to the windshield or dashboard of the vehicle. There are other places to place navigators, but these are the most common. The main thing is not to install the navigator in places where it will obstruct the driver's view and interfere with driving. Also, do not mount the product where the airbags are located.

The navigator does not always come on sale with a fully charged battery, so before you start using it, you need to charge the battery. Depending on the model, the navigator can be charged either through the USB port of the computer or from the 220V network through the appropriate Charger, but most often charging takes place through a car charger, which is included with any navigator. Other charging methods may not be as effective.

Connecting the car GPS navigator to on-board network the vehicle is carried out only after the vehicle has already been started, otherwise the device may be damaged.

How to set up car GPS navigator (auto navigator)

Most often, difficulties with the navigator arise when laying a route. In most cases, this is due to the fact that users do not study the instructions for setting up the navigation program, because the route can be laid according to various algorithms (bypassing traffic jams, along main roads, in the optimal way, fastest, etc.). How to use the navigator without understanding the instructions?

So, for example, in the "Navitel Navigator" program, you can set the route planning method by time (fast route) or by distance (short route). That being said, the shortcut will not necessarily be as fast as it might seem. You can also set options such as avoiding toll roads and dirt roads and minimizing U-turns. Therefore, in order not to be surprised at how your navigator made a path to the indicated point, first read the instructions and set the navigator to a suitable way of building a route.

Instructions for setting up Navitel

By the way, Garmin navigators tend to avoid left turns when building a route. This is a feature of this brand. Therefore, if you do not like left turns, then you should take a closer look at one of Garmin navigators when buying.

Another user complaint is that the navigator warns late about the upcoming maneuver. It is also a configurable parameter of the navigation software. For example, in the Navitel Navigator program the time interval for which you need to warn about the maneuver is set in the navigation program settings menu, but in the City Guide program the warning is given 500 meters before the turn. This can be a decisive argument when choosing a navigator.

GPS navigators were once exclusively military equipment. Today they are used by many car and other vehicle drivers. There are many models, each with its own characteristics. How to make the right choice?

How does a car navigator work

The principle of operation of navigators is simple: they determine the location using communication with a satellite. Many models also analyze the route through the Internet. The error is usually no more than 10 m. Modern options are able to lay routes to the destination and change them in real time when you deviate from the path. Registration of movement parameters is possible: speed (current and average), driving time. Modern navigators are full-fledged media devices. They can be used to play audio and video files, launch games, and more.

Classic navigator: green arrow is a car, blue is a route. On the left you can see the distance to the turn, travel time, speed and current time

Navigation software for cars

The technique works under software control. In our country, the most common options are I-Go, Navitel and Garmin:

• I-Go. Powered by technology that is controlled operating system Windows CE. It is often installed on the products of the brands Asus, GoClever, Tenex, Ergo, EasyGo, MIO, LG and some others. The cards from this manufacturer are different high degree elaboration. Navigators with I-Go are recommended to be used by drivers of commercial vehicles who often travel outside the territory of the Russian Federation.

I-Go navigator interface: minimalistic, simple and straightforward

• Navitel. The best option for those who mainly travel through the territory of the CIS countries. Navitel is famous for the most detailed maps Russia, Ukraine and the Republic of Belarus... It is used in the technique of the same brands as I-Go, since it also works under Windows control CE.

This is how your path looks like in the navigator with Navitel software. Traffic accidents are marked with special icons

• Garmin. Specific American-made product. Works under Linux OS and only in navigators from Garmin - one of the world's largest manufacturers of such equipment. The main advantages are reliability and ease of control. Navigation is convenient, but the cost can be quite high. Garmin is the best choice for international shipping... Most of the models of this brand cannot play music and video - this is a highly specialized equipment for professionals, with powerful processors and fast receivers.

Garmin is a tool for those who want to always find the right path. The high price pays off

Cars and trucks

When choosing a navigator for a passenger car, everything depends only on your preferences. Trucks are a little more complicated. Pay attention to navigators with additional functions for commercial vehicles. For example, they can indicate the weight and dimensions of the vehicle - this will be taken into account when laying the route. The technique will guide you along the most suitable roads, avoiding low bridges.

Reviews of popular models

Garmin Dakota 20. Advantages: compact, lightweight, easily fixed in the hand and durable, unbreakable, user-friendly interface and display, perfectly holds the charge, catches satellites instantly and does not lose them !! the ability to download maps and update them, you can buy an additional memory card, ideal for mushroom pickers, hunters, fishermen and cyclists, suitable for a car, high accuracy route and location, the ability to use as a USB flash drive, raster maps, compact. Disadvantages: high price

Tatiana Kulikova

http://torg.mail.ru/gps/garmin-dakota-20-id260058/

iBOX Pro-7900 HD. The navigator is easy to use. But it is not entirely clear that the update was downloaded on the Navitel website ... as a result, after installing the updater, the program sees the navigator, but does not offer any action, except to “buy”. Advantages: The navigator itself is excellent, there are no complaints about the work, but the technical support is lower…. Disadvantages: A very terrible site "Navitel", the instructions for installing updates are one thing, in fact, everything is different. It is still not clear now whether to update (s) or how. For example, in my city recently, the roads in new places in the center were CRADINALLY rebuilt, the navigator does not see the restructuring, writes that I am on the lawn right next to the eternal flame.

Nikolay Smirnov

http://torg.mail.ru/gps/ibox-pro-7900-hd-id14219887/

Garmin nuvi 50. I have a nuvi 2597, bought in Europe with a map of Europe. I traveled across Europe in the spring, just super, turned on and led out of the most confusing streets of Prague and Paris. But then I came home and decided to download a map of Russia and specifically Moscow and M.O. In the store at the officials, in T.Ts. Gagarinsky, for almost two thousand, inserted an SD card with a map of Russia program. I have been traveling for two months in Moscow and the region and am terrified. Firstly, the menu does not contain many of the settings that were in the European menu (such as entering the address index), and secondly, it is impossible to enter elementary settlements such as Krekshino or Molokovo and ..., they are not in the keyboard layout by default. And the worst thing is that the maps have been uploaded at least a year ago, for example, he warns me about the left arrow, and there is already a year since there is no traffic light at all (for example, when leaving Admiral Kornilov on Kaluzhskoe highway) and there are a lot of such jambs. I am very sorry that I did not add a little more and did not take some unpretentious Navitel, in which a detailed modern map is loaded and which can be updated, unlike of course, from an SD card. I just wanted to use Garmin, because I dumped a lot of money for it with Eurocard and Russian menu. Conclusion, I do not advise taking extra in Garmine. options and cards on SD, everything is uploaded there poorly and poorly, thrown away money.

Manlyuk Oleg

https://market.yandex.by/product-garmin-nuvi-50/7764831/reviews?canonical=garmin-nuvi-50&productId=7764831&lr=0&rtr=157

Screen

• Screen size (diagonal) is measured in inches. The wider, the more information can be seen. In modern navigators, the screen size ranges from 3.5 to 7 inches. The best option for passenger car- around 5"... It will not take up much space and will give you the opportunity to see everything you need.
• The display sensor is either resistive or capacitive. The resistive version is more accurate, but if the device is equipped with a large screen, the lack of accuracy of the capacitive version ceases to matter.
• Resolution is the number of pixels per unit area. The quality of the picture on the screen depends on this parameter. Resolution is expressed in letters or numbers (VGA, 640x480). The choice depends on the screen size. For a small device (up to 5-6 inches) 480x282 is enough. For large (6-7) - 800x480.
• Viewing angle. The wide viewing angle makes it possible to see the image on the screen from the side, without losing contrast. In most modern models, the indicator is 140 degrees. In general, the more the better.

Specifications

CPU

The most important characteristic is the clock frequency. The higher it is, the faster the main functions are loaded and the routes are calculated. Most drivers will be satisfied with a frequency of 500 MHz, but in commercial vehicles, you can use more powerful models - from 700 MHz.

RAM

Directly affects the speed of task execution. The minimum acceptable option is 128 MB, but it is better to take from 256 MB. In this case, you do not have to spend a lot of time switching between applications and working in 3D.

Built-in storage

Many modern navigators use a solid state drive (SSD). The larger its capacity, the better. The device plays a role hard disk computer - it stores maps, your files and much more. In the best options, the capacity reaches 64 GB, but in most cases a much smaller amount is enough - about 4 GB.

Support for memory cards is possible. CompactFlash is the cheapest and slowest option. SD cards are much faster and more reliable. MicroSD - The same as SD, but smaller in size.

GPS module

Responsible for receiving signals from the satellite. Consists of antenna and chipset. Most navigators have a built-in antenna, but there are also remote ones. A chipset is a set of chips that processes a signal. The best options are made by Mediatek and SiRF... A good chipset will make it possible to obtain accurate coordinates in dense buildings.

Number of channels

The more channels, the more accurate the location will be. The minimum option for today is 32. It is recommended to pay attention to equipment with 64-66 channels. This will make it possible to receive not only direct, but also reflected signals, avoiding interference.

Information update rate

The more often the navigator processes the information received from the satellite, the more accurate the determination of coordinates will be. But this also has a negative side - a high rate quickly discharges the battery. More frequency is needed for drivers who constantly move through large cities with heavy traffic.

GSM / GPRS module

The navigator can also be used to access the Internet. This is necessary not only for entertainment, but also for expanding functionality - for example, downloading new maps or more accurate orientation on the ground. However, to connect, you will need to insert a SIM card into the equipment.

Installing navigators

Where to put

Standard portable models are equipped with a standard suction cup mount. They are designed to be mounted on glass. You can fix the fixture in almost any part of the glass, but make sure that it does not obstruct your view. Remember - the metallized film on the glass can shield the antenna (especially the built-in one), which will reduce the signal accuracy.

The most common mounting option for the navigator is on the glass, to the right of the steering wheel

It is possible to use additional fastening systems. With their help, the equipment is generally attached to any place in the cabin - on the panel, body, roof ... If necessary, the device can be quickly removed. There are pocket navigators. They are secured in a phone holder or cup holder. It is not very convenient to use such a model - it is desirable that a passenger sit next to him, who would suggest the route.

How to connect

If you intend to use a modern large screen navigator, the connection process will be a little more complicated.

You will need a screwdriver and a 2A fused wire (you can solder it yourself). You may need an RCA-mini-jack adapter.

Don't be alarmed, some of these wires can be dispensed with. Usually only food is enough

1. In most modern cars, the place for the navigator is located above the radio tape recorder or below it. Remove all parts to be replaced from the panel.
2. Connect the video inputs, which will be used to connect to the radio tape recorder, rear view camera and other devices.
3. When adjusting the gyroscope, set it to a perpendicular position to the ground.
4. Connect a USB extension cable - this will make it possible to connect external media to the equipment.
5. Connect the navigator to the cigarette lighter through the fused wire. Thanks to this, the fixture will receive electricity without occupying the connector.
6. Fasten the appliances to the panel with wireframe fasteners. It is best to use double-sided tape. Some models are supplied with special fasteners - it greatly simplifies the task.

Video: connecting a GPS navigator

How to make a holder for a car with your own hands

1. The cheapest option is to buy double-sided tape or duct tape for sewing. Clean the dashboard and back cover of the navigator from dust and dirt, and then attach the device to the dashboard with tape or tape. This method is only suitable for careful drivers, as the material may not withstand strong shaking.
2. A more reliable option is to use a stationery clip ("binder clip"). Remove the staples from it and bend the side elements to fit your navigator. Wrap them with thick thread so that they do not unbend. The device can be placed in the air duct. It will firmly fix the technique. The disadvantage is that getting the navigator out of such a holder is not always easy.
3. If you are not afraid to drill a dashboard, you can hang the navigator on it with a wire (only for navigators in a case with a holder!). Drill two holes for the wire diameter. Bend the wire and insert into the holes. Attach the cover with the gadget to it.

Configuring and Updating

In most cases, you need to connect your navigator to your computer or laptop to configure and update. You will need proprietary software from the manufacturer (for Navitel, this is Navitel Navigator Updater) - the instructions usually tell you where to download it.

1. Connect your gadget to your computer via a USB port. The PC must have an Internet connection!
2. In the settings menu of your navigator, select the Mass Storage mode.
3. Run the program to update.

The rest of the steps take place automatically - you only need to click "Next" and "Finish".

Some modern navigators can be updated via Wi-Fi or mobile internet. The process does not require any intervention on your part. However, it is better to select "Request permission to update" in the settings, otherwise the technician may use up all your traffic.

Add a comment

How to connect GPS?

Without exaggeration, GPS is one of the most demanded technologies. Thanks to her, each person can find out their location on the map, as well as determine the trajectory of their movement. In this article, we will look at how to install gps in a car.

Connecting a standard gps navigator

GPS navigators can be divided into two types

• connected by wires to the battery;
• connected using a USB cable or wireless.

The first type of navigator is connected to the battery. Typically, these navigators have two wires: red and black. The red wire connects to the positive terminal of the battery, and the black wire connects to any secure engine mount. It is not recommended to connect the black wire to the negative terminal, as this can cause a quick discharge of the battery. After all, the navigator consumes quite a lot of electricity, as it requires constant updating of information.

The second type of battery is connected to the car radio using a USB cable or wirelessly.

Using your phone as a gps

Modern smartphones have a function that can be used by a car owner as a gps navigator. To do this, you need to download maps that can be found on the network absolutely free of charge, after that you will need to go to the navigation settings and select "Download maps", the device will automatically download maps that you can use when navigating.

Next, you will need to select the map command, after which the first of them will be loaded. Once downloaded, you will be able to see your location and plan your route. There is another way to use maps on your mobile phone. We are talking about special services, for example, google maps, yandex maps, 2gis. These services have long proven themselves and have received a lot of positive feedback from users across the country. If earlier they were not in demand due to the fact that they differed in their low efficiency in determining the location, now they are used by many residents of our country.

Now all you have to do is pin the phone to the dashboard. To do this, you can use a special holder that is sold in any electronics store or car dealership.